1928-1931 Ford Small Block Chevy V8 Engine Mounting Kit

SKU: CP-2105

Description

CP-2105 Small Block Chevy V8 Engine Mounting Kit for 1928-1931 Ford   This kit includes: Weld on frame adapters (frame must be boxed) Chassis Engineering side mounts Bolt cushion set Transmission spacer (V6 Buick only) Instructions when needed   Engine mounts fit: Chevy V8, 1958-up : 283, 302, 307, 327,… Read More

Category:

$100.00
PRICE
QTY

Description

CP-2105 Small Block Chevy V8 Engine Mounting Kit for 1928-1931 Ford

 

This kit includes:

  • Weld on frame adapters (frame must be boxed)
  • Chassis Engineering side mounts
  • Bolt cushion set
  • Transmission spacer (V6 Buick only)
  • Instructions when needed

 

Engine mounts fit:

  • Chevy V8, 1958-up : 283, 302, 307, 327, 350, 400 CI Small Block
  • Chevy V6 with the distributor at rear

 

Installation Instructions for CP-2105 Small Block Chevy V8 Engine Swap Kit for 1928-1931 Ford Car and Pickup Truck. Please read all instructions before starting.

 

Start with boxing the frame. When boxing the frame, keep frame level front and rear. If the frame is off, it will have a twist and your parts and components will not fit properly.

Use a captenters type level to check the top surface of the frame when the frame is right side up and right side down. Clamp angle iron across top of frame rails, then tack weld to inside frame and installation will be square. Recheck often.

Reinforcing plate goes on outside of frame, then fill gap with weld.

Remember to spot first and recheck for squareness of frame.

Frame adapter will need fitting to the boxing plates. It has proven impossible to ensure an exact fit due to all the variables (different parts, years etc) involved with the installation.

Fit frame adapters to the specifications below:

Dimension A depends on the year of your car, type of firewall used, particular engine model, waterpump length and transmission used. It is impossible for us to account for all variations, so responsibility for a proper working measurement is in your own hands.

Make sure mounts are straight and level. Tack in place, then double-check all measurements and do the final weld. All steering and exhaust need to be checked at this time also.

Bolt engine mounts to engine and install along with cushion as displayed

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

Additional information

Weight 10 lbs
Dimensions 12 x 8 x 4 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Instruction

Download