SB-1054PM Front Sway Bar for 1949-1954 Chevy (Pinto Mustang IFS)

SKU: SB-1054PM

Description

SB-1054PM Front Sway Bar for 1949-1954 Chevy (Pinto Mustang IFS).This is an excellent way to improve the handling of the top heavy Chevy. If you are using non-Chassis Engineering full lower A-arms (no strut rods), please include part AU-0010PMA (link) with your order of your Pinto Mustang Swaybar for no… Read More

Category:

$170.00
PRICE
QTY

Description

SB-1054PM Front Sway Bar for 1949-1954 Chevy (Pinto Mustang IFS).This is an excellent way to improve the handling of the top heavy Chevy.

If you are using non-Chassis Engineering full lower A-arms (no strut rods), please include part AU-0010PMA (link) with your order of your Pinto Mustang Swaybar for no additional cost. We will substitute weld-on sway bar mounting tabs in place of the regular Pinto Mustang mounting brackets.

Directions assume the use of a Chassis Engineering Bolt-on IFS crossmember. If you use something different, make appropriate modifications if needed.

Clamp sway bar and mounts to determine position on the frame lips.

The sway bar should be setup with full weight on the suspension.

Check bar movement to be sure that bar will not hit anything while under suspension movement.

Bolt lower linkage mount to lower arm assembly. Use bolts provided. Large hole in lower mount should point forward.

Drill all holes and install bolts and bolt sway bar in place.

Linkage must be straight up and down and not lean to any angle.

Assemble linkage as shown.

UntitledWARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.

Additional information

Weight 15 lbs
Dimensions 51 × 17 × 4 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.