Description

Chassis Engineering CS-2117 comes as a pair of Universal 1965+ Ford V8 Engine Mounts for 22 inch or wider frames.

19 inch Engine Mounts fit Ford V-8 1965-up 221-260-289-302-351 CI

Note: Before going the universal route, have a look at our complete engine mount kits here and see if there is a swap kit for your car listed. If there is, use that kit instead.

To determine the length for the engine mount, measure the frame width:

• For boxed frames, measure the distance on the inside of the frame between the boxing plates:
• For channel frames, measure the distance on the inside of the frame between the side walls of the frame rails. Then use the information below to determine the length you need.

Note: If you are using one of our engine crossmembers instead of our frame adapters, use 19 inch engine mounts.

For best results, have a look at our universal frame adapters selection to find a matching set of mounts for your particular car frame, and use our street rod engineered SS-0011 engine cushion set with Thru Bolt Construction for safety, stability and durability.

WARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm.  For more information go to www.P65Warnings.ca.gov.