Rear leaf spring shackles, specifically designed to go with our 2-1/2″ wide Chassis Engineering rear leaf springs.
Once the rear end mounting kit has been installed on the frame and all instructions and dimensions rechecked, all bolts may be tightened.
Install the rear shackle by putting bushings in place on the shackle between the spring and the rear spring hanger.
Please be careful when tightening the shackle nuts. Do not over tighten them, as the outside shackle plate seats on the shoulder of the shackle studs and not when the bushings smash as far as possible.
WARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.