AU-5030DR 1930-1931 Ford Model A Apron Fill Saddle Gas Tank
Photo is shown with optional fuel senders.
These Model A Ford gas tanks mount with the running board braces. No straps to come loose and cause shifting or gouging. The switchover valve is included.
The 1930-31 Ford Model A saddle gas tanks are not recommended for Fuel Injected cars & trucks.
The size of each tank is 38″ x 7″ x 9-3/4″.
Each tank requires its own 5 bolt hole fuel sending unit.
Since these tanks bolt to the outside of the frame the original mechanical brakes can not be used with these tanks.
- Bolt on with running board brackets.
- Cut 1.5″ hole in splash apron.
- Install Grommet and billet cap plug.
- Plumb and wire.
The 1-3/4″ diameter Billet Cap-Plugs & Grommets are included with both Model A fuel tank kits.
To fill your saddle tanks, remove billet cap-plug, insert fuel nozzle through grommet and into the push-thru cap.
It will open to let fuel pass through.
When finished remove the fuel nozzle and the push-thru cap shuts.
Now just insert the Billet plug and you’re finished.
WARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.