AS-2032 Brake Pedal Kit for 1932 Ford
Our new brake pedal kit bolts to the x-rail in location provided. Use with Chassis Engineering x-rails part# AT-2032. This kit uses Pinto-Mustang (Ford bolt pattern) master cylinder and others by filling in the holes. This is the first step to a standard or power system.
Installation instructions for AS-2032 Pedal Bracket Adjustment for 1932 Ford.
To adjust the pedal mount around the steering column, the pedal must be heated and bent. Make sure that pedal is solidly mounted or clamped before making adjustments. Your application may vary from the pictures.
Apply plenty of heat to the areas at which the bend needs to be. Bend at point 1 first then at point 2 as shown.
Once the pedal has been adjusted, it might look like the one drawn below:
When possible, match to floor and original location.
WARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.